This article will show you how to fix the temporary profile issue in Windows 7/10/11.
How to Fix Windows 7 Temp Issue on Workgroup and Domain Environment?
1) Before do anything, restart the computer 2 or 3 times to see whether it’s going back to your old correct profile. Go to next step if this doesn’t work.
2) Rename the temp profile registry and revert back the old registry settings for the correct profile. This method works most of the time for me in Workgroup and domain environment.
a) Log in with temp profile.
b) Start registry editor by typing regedit in find box of Windows 7.
c) Navigate the following location.
![How to fix Temporary Profile in Windows 7](https://amarittech.com/wp-content/uploads/2022/10/image-4.png)
d) You will see similar keys under profile list, but one with .bak, as shown below.
![How to fix Temporary Profile in Windows 7](https://amarittech.com/wp-content/uploads/2022/10/image-5-1024x315.png)
e) The key with .bak is for the correct old profile. Currently your Windows 7 computer logged in with fresh (temporary) profile with same key. So, rename the new profile key (which is not having.bak) and remove .bak from correct profile key.
f) That’s it. Log off and log in (or restart) with your username and password. You must get your correct profile with icons and profile settings back in Windows 7, if you are lucky enough.
Still if Windows 7 laptop loads with temporary profile and creates a registry key with .bak, that means user profile is really corrupted and Operating System is not reading it properly.
3) Few times this method worked for me, repair the corrupted files. Usually the corrupted ‘Ntuser’ files cause this issue. So, run the check disk for partition which is having user profile.
press key Y
After restarting for check disk, if you see corrupted entries and repairing process inside your user profile folder, then you can hope for good news here. If it finds and repairs any files especially Ntuser files, you may get your old Windows 7 profile back.
If above steps do not help you out, then we need to create a new profile with new username.
Create New User Account
![How to fix Temporary Profile in Windows 7](https://amarittech.com/wp-content/uploads/2024/02/tempprofile.webp)
Basically, we need to create a new user account, login with it and transfer the data from old user profile to new user profile. It is easy in workgroup environment as you can create new username locally, but it is tricky in domain environment. Because the existing user account is already there on domain server and nothing wrong with it. Also, creating a new different domain user account will cause issues on corporate emails, domain groups membership and shared permissions.
So, we need to treat both cases separately.
4)Create new username in non-domain (workgroup environment) from control panel or computer management. Make sure to add the new user to administrators’ group.
Login with new username and start copying your old data from old profile. I normally copy below data,
a) My Documents (Music, videos and downloads)
b) Desktop
c) Favorites
d) Any outlook PST files (find more information about location of PST files here)
But Microsoft suggests copying entire old user profile (except 3 files) as shown in this official site link.
5) New user profile in domain environment.
Since we can’t delete and create new domain user account for this purpose, we will play around with client computer only. Let’s completely remove the user profile and recreate again.
Copy the important user data (a to do in above step 4) or entire folders from corrupted profile to new location. Double-check that you have copied all required folders and files from old profile, because we are going to delete it now.
Go to Advanced settings of System as shown below, click on Settings (user profiles), select the corrupted user profile, which is not loading properly in Windows 7, then press Delete button. Delete button will be enabled only if you login with different user account.
This will remove the entire user profile and related user SID from computer including the registry keys we talked about earlier. You can cross check the proper removal of user account (SID) by checking the C:\Users folder. Once it is removed properly, restart the computer and login with same username (which was not loading earlier). The computer should create a new user profile as this is the first time the user is logging on. You need to copy back your old important data to new profile and set email outlook etc. If required.
I hope these tips help to fix temporary profile issue on Windows 7