If your Windows XP computer is restarting again and again, there are a few things you can do to try to fix the problem. This blog post will walk you through some of the most common solutions.
- Set your first boot device in the Bios to CD-ROM. Insert your Windows XP CD, save the bios settings and exit. Soon “Press any key to boot of CD” will appear on the screen, hit the space bar to continue.
- Now setup will inspect your hardware and software, it then will load various files required for the repair. Just wait and be patient, this may take a few moments.
- Soon a menu will appear (as pictured below), press enter to continue.
- Now the “End User Agreement” Press “F8” if you agree, “ESC” if you don’t.
- You will now have to select the installation you wish to repair. Usually there is only one, but sometimes, there may be 2 or more (i.e., you have done a parallel install to resolve a problem), use the up/down arrow key to select the install, and then press “R” to continue.
- Setup will now examine the disk be patient, it can take a few minutes.
- Setup will go through a percentage – 1 to 100%
- A screen will soon appear. Press “F3” to continue
- Now setup will reboot system, wait 15 seconds or just press enter.
- Now it is time to see if this has solved your problems.
hope it work…..goodluck